Skip to content
- Two adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger pieces.
- Two feed rates allow for quick rough-cut and finer finish-cut settings.
- Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds.
- Feed slide protection keeps travel surfaces free of dirt and chips.
- Negative rake tool bits standard, provide lower cost of ownership.
- Solid twin cutter tool simultaneously resurfaces both sides of rotor.
- Full-drum support hex boring bar guarantees correct tool angle for drums.
- Infinitely variable drum feed from 0.002 inches to 0.02 inches per revolution.
- Quick drum-to-rotor changeover.
- User-friendly ergonomics.
- Supports drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
- Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero.
- Extended spindle increases drum capacity to 9.875 inches.
- Support drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
- One-pass finishes – One-pass design provides exceptional rotor finish.
- Single-speed rotation and feeds – Simple operator use, with no adjustments necessary.
- Positive rake tool bits create precisely machined surfaces that meet or exceed OE specifications.
- Quick drum to rotor changeover – Converts from drums to rotors in less than 30 seconds; with optional arbor, can machine drums to 200 pounds.
- Solid twin cutter tool simultaneously resurfaces both sides of rotor.
- Feed slide protection keeps travel surfaces free of dirt and chips.
- Full-drum support hex boring bar guarantees correct tool angle for drums.
- Ideal for medium-duty truck service.
- Extended spindle increases drum capacity to 9.875 inches.
- Three adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger ones.
- Two feed rates allow for quick rough-cut and finer finish-cut settings.
- Speed control gives operators a quality finish in less time.
- Adjustable-bar twin cutter provides the greatest range of settings from small cars to 5-ton applications
- Custom digital finishes – By digitally controlling the feed rates, it’s easier to find that sweet spot for your particular application, giving you the highest possible quality finish available.
- Shift on the fly 3-speed – The 4000E is the first lathe with an integrated, synchronous gearbox and shifter. Now you can choose the speed that makes the most sense for your work piece, right at your fingertips.
- Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds.
- Feed slide protection keeps travel surfaces free of dirt and chips.
- Positive rake tool bits allow for low-pressure, precise turning that produces superior machined surfaces with less chatter, every time; negative rake tool bits are also included.
- Solid twin cutter tool simultaneously resurfaces both sides of rotor.
- Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero.
- Extended spindle increases drum capacity to 9.875 inches.
- Full-drum support hex boring bar guarantees correct tool angle for drums.
Ammco 4000SP Combination Disc/Drum Brake Lathe
Ammco 4000E Combination Disc/Drum Brake Lathe