SPL 8 LO-PRO
The SPL 8 LO-PRO is a hydraulic asymmetric two post lift with a lifting capacity of 7,700 pounds and low profile arms. This two post lift features a powerful 3.5 hp integrated power unit and covered hard-chromed cylinders, making it a precisely engineered mix between durability and appearance.
The Nussbaum low profile arms for the SPL 8 LO-PRO are specially designed to reach under lowered chassis. They access hard-to-reach lift points with ease, making it safe and simple to service more vehicle types.
With lowered sports cars, sedans, hatchbacks and other track vehicles being more popular now than ever, you need the ability to service these cars without scraping side skirts or turning down customers. Our low profile arms feature telescoping arm channels that are significantly lower off the ground, so once a vehicle’s lift points have been accessed, there is no bulging bulk of steel that could scrape the car. Low profile arms are also ideal for vehicles with lift points at the outer edges of a vehicle’s wheelbase.
The SPL 8 LO-PRO with it’s TRUE asymmetric design has virtually the same drive thru width as other lifts but has an overall width up to 20″ narrower than the competition.
For long life and durability, only hard steel hydraulic lines are used. They will not wear and age like flexible hydraulic hoses!
The SPL 8 LO-PRO contains a high performance power unit with adjustable lowering speed through a single control lever, which allows for safer lifting and lowering! And the lift automatically shuts off when it reaches highest position, or at the highest vehicle height, eliminating pump fatigue.
The SPL 8 LO-PRO two post lift is the perfect automotive lift for your shop. With our manufacturing facility in North Carolina, these two post lifts are readily available for fast delivery and proudly MADE IN THE USA.
SPL 8 LO-PRO TWO POST LIFT FEATURES:
- Narrow bay setting at 124 ″ allows most efficient use of bay space in the industry without losing drive through width
- Fast lifting and lowering times
- Variable lowering speed with manual control lever
- Mechanical security locks
- Hard-chrome cylinder guarantees extreme long-life cycle
- Productive coverings for column cylinders provide safer operation and clean shop appearance
- Asymmetrical two post vehicle lifting
- Low maintenance and almost wear-free cylinder
- Designed for short and long wheelbase vehicles
SPL OTTO 9
The SPL OTTO 9 is the reinvention of car lifting and workshop design. Over 75 years of NUSSBAUM innovation and experience has lead us to this revolutionary design. We are proud to name this lift after our founder Otto Nussbaum. The SPL OTTO 9 is named for the benefits it gives to operators, as well as the productivity in terms of space and dollars to the owner. And this lift is 100% manufactured in the USA.
Why is the SPL OTTO 9 so revolutionary?
- It changes the way you lift your vehicles
- It changes the way your workshop looks
- It prepares your workshop for electric vehicles including battery exchanges
- It will always provide the best access for the job
SAVE UP TO 20 SQUARE FEET PER LIFT!
Installing the SPL OTTO 9 at a width of 120 – 124″ you not only optimize your workshop space, you can also install it 40″ closer to the wall than any other 2-post lift on the market. This all-around space savings gives you more access around the vehicle with much less effort. The 120 – 124″ install is perfect for any shop that works on standard passenger cars, but also pickup trucks. Its narrow installation and long arm reach make it very easy to reach frames on trucks, as well as pick up points that are far apart.
OTTO TWO POST LIFT FEATURES:
- Double jointed rear arms
- 9,000 lbs lifting capacity
- OTTO is ready for new technologies like electric cars and battery exchanges
- Can be installed as close as 120 – 124″ apart and still reach most passenger vehicles
- Standard install at 124″
- Always open the doors
- Obstruction free access to the areas you need to work on
- OTTO allows for new service opportunities with electric cars. The patent-pending lift offers full service underneath the car which allows all covers to be removed to get to the vehicles batteries
- Lift 100% manufactured in the USA
SPL 10 3-STAGE XL
SPL 10 3 Stage XL is an extended height hydraulic asymmetric two post lift with a lifting capacity of 10,000 pounds and 3-stage arms. This two post lift features a powerful 3.5 hp integrated power unit and covered hard-chromed cylinders, making it a precisely engineered mix between durability and appearance.
This lift consists of SPL10000MXL 3S and arms 2100SPL08801A and SPL10F02100.
The SPL 10 3 Stage XL two post lift is the perfect automotive lift for your shop. With our manufacturing facility in North Carolina, these two post lifts are readily available for fast delivery and proudly MADE IN THE USA.
The SPL 10 3 Stage XL with it’s TRUE asymmetric design has virtually the same drive thru width as other lifts but has an overall width up to 20″ narrower than the competition. And with the extended lifting height of 80.5 inches, you are increasing your space in all directions!
For long life and durability, only hard steel hydraulic lines are used. They will not wear and age like flexible hydraulic hoses!
The SPL 10 3 Stage XL contains a high performance power unit with adjustable lowering speed through a single control lever, which allows for safer lifting and lowering! And the lift automatically shuts off when it reaches highest position, or at the highest vehicle height, eliminating pump fatigue.
SPL 10 3 Stage XL TWO POST LIFT FEATURES:
- 3-Stage arm design enables you to position vehicle doors in front of or behind columns to avoid door damage and provide you with added reach
- Narrow bay setting at 124 ″ allows the most efficient use of bay space in the industry without losing drive through width
- Fast lifting and lowering times
- Variable lowering speed with manual control lever
- Mechanical security locks
- Hard-chrome cylinder guarantees extreme long-life cycle
- Productive coverings for column cylinders provide safer operation and clean shop appearance
- Asymmetrical two post vehicle lifting
- Low maintenance and almost wear-free cylinder
- Designed for short and long wheelbase vehicles
OTTO 12
The HF NT series is a revolutionary hydraulic two post lift. The patented HyperFlow® technology allows the lift to be perfectly and automatically synchronized without cables or pulleys. A double hydraulic circuit with 4 cylinders makes a mechanical locking system no longer necessary. This new generation of lifts are the perfect solution to increase the productivity and efficiency of the workshop while reducing cost of ownership.