Quality logo

AEW is a Quality Lift distributor and factory authorized service center!

Q10_symmetric_fullQuality Q10 2-Post 10,000lb Lift

  • ALI/ETL Certified
  • Lifting Capacity 10,000 lb.
  • Max Load per Arm: 2,500 lb.
  • Higher Rise with 71″ Stroke Cylinder
  • Rise Height of 78.75″ Provides Excellent Underneath Clearance
  • Adjustible Overhead For Max Clearance or Protection Against Lower Obstructions.
  • Height Overall: 12 ‘3 1/2″ or 11’ 5 1/2″
  • Width Overall: 131 3/4″
  • Drive Thru Clearance: 98 3/8″
  • Padded Overhead Safety Switch
  • Floor to Overhead Limit Switch: 11′ 8 1/2″ or 10′ 10 1/2″
  • 3-Stage Front Arm and 2-Stage Rear Arms.
  • Symmetric or Asymmetric Lifting.
  • Front Arm Reach: 21 3/4″ – 39 1/4″
  • Rear Arm Reach: 38 1/4″ – 55 3/8″
  • Double Telescoping Screw Pads.
  • Optional Drop In Truck Adapters
  • Screw Pad Height: 4″ – 7 1/2″
  • Inside Columns: 110 1/4″
  • Full Size Cables and Steel Cables for Longer Life
  • Single Point Lock Release
  • Rubber Door Protector
  • Powder Coat Paint Blue
  • Motor: 2HP
  • Voltage Single Phase: 208-230v Standard
  • Ceiling Height Required: 12′ 5″

Q12 F250 full

Quality Q12 2-Post 12,000lb Lift

  • ALI/ETL Certified Lift
  • Lifting Capacity: 12,000 lb.
  • Max Load per Arm: 3,000 lb.
  • Rise Height: 80″ Provides Excellent Underneath Clearance for Technician
  • Adjustable Overhead for Max Clearance or Protection Against Lower Obstructions
  • Height Overall: 14’7″ or 13′ 10″
  • Width Overall: 137 3/4″
  • Drive Thru Clearance: 101″
  • Rubber Door Protector
  • Padded Overhead Safety Switch
  • Floor to Overhead: 14′ 4″ or 13′ 7″
  • 2-Stage Front and Rear Arms for Symmetric Lifting
  • Front Arm Reach:31 13/16″ – 54 11/16″
  • Rear Arm Reach: 31 13/16″ – 54 11/16″
  • Single Screw Up Square Arm Pads
  • Screw Pad Height: 5″ – 9″
  • Inside Columns: 114 9/16″
  • Full Size Cables and Steel Pulleys for Longer Life
  • Single Point Lock Release
  • Powder Coat Paint Blue
  • Motor: 2HP
  • Voltage Single Phase: 208-230v
  • Ceiling Height Required: 14′ 8″

Q4P07_lp

Quality Q4P07 Four Post Parking Lift

  •  Simply the best car lift for the money
  • Utilizes Our Commercial Grade Design
  • Fits in tighter space garages.
  • Manual Locks – No Air Required
  • 7,000 lb Lifting Capacity
  • Free Standing or Bolt-down Option. Portable with Q4P09CS Caster Set.
  • Formed Runways with Rail System. Supports Optional QRJ04H Rolling Jack, Q4P09JT Jack Tray, or Q4P09DT Drip Tray Set.
  • Single Hydraulic Cylinder
  • Commercial Grade cables – 3/8″
  • Adjustable Internal Lock System
  • Secondary Lock Mechanism
  • Full Size Columns – No Exposed Cables
  • Oversized Slider Blocks for Smooth Operation and Stability
  • Rise height underneath runway – 63″
  • Outside to Outside Columns – 100″
  • Overall length (with ramps) – 195 1/2″ (w/o ramps) 165″
  • Inside columns – 92″
  • Height of columns – 79 1/2″
  • Width of runways – 20″
  • Height of Runway – 4″
  • Width between runways – 38″
  • Length of runways – 150″
  • Detachable aluminum approach ramp length – 36″
  • 13 lock positions
  • Pre-assembled Lock Mechanism
  • 1HP 110 Volt Plug-in or 220v Power
  • Powder Coat Paint: Blue, Red or Black